7. Mac OS X Configuration
This chapter explains how to use this printer with a Mac OS X.
Using the Printer Driver under Mac OS X
This section explains how to configure a Mac OS X to use USB and TCP/IP.
Use the following procedures to configure the printer drivers for Mac OS X 10.3.7. The procedures vary
depending on the operating system.
• Mac OS X 10.2 or higher is required.
• The PPD files are stored in the following folder on the CD-ROM.
Mac OS X: MacOSX PPD Installer
Installing the PPD Files
Follow the procedure below to install a PPD file to print from Mac OS X.
• You need an administrator name and a password (phrase). For details, consult your network
administrator.
1.
Insert the CD-ROM into the CD-ROM drive.
2.
Double-click the CD-ROM drive icon.
3.
Double-click the [Mac OS X] folder.
4.
Double-click the manufacturer folder for your machine model.
5.
Double-click the [MAC OS X 10.2 or later] or [MAC OS X 10.5 or later] folder, depending
on your operating system.
6.
Double-click the [MacOSX PPD Installer] folder.
7.
Double-click the package file icon.
8.
Follow the instructions on the screen.
Setting Up the PPD Files
This section explains how to add the PPD file to your system.
1.
Start System Preferences.
165