Setting Up Options For Mac Os X - Ricoh SP 5200S Operating Instructions Manual

7. Mac OS X Configuration
2. Click [Print & Fax].
3. Click [Set Up Printers].
Depending on your computer's operating system, [Set Up Printers] may not appear. If [Set Up
Printers] does not appear, proceed to the following step.
4. Click the [Add] or [ ] button.
5. Select [IP Printing] from the drop-down menu, and then select the machine from the list.
Mac OS X 10.5 or higher
Click [IP].
Mac OS X 10.4
Click [IP Printer].
6. In [Printer Address], type the machine's IP address. Select [LPD/LPR] for [Printer Type],
and leave the queue blank.
Mac OS X 10.4 or higher
Enter machine's IP address in the [Address:] box. Select [LPD] as the protocol, and leave the
queue blank.
7. Select the connected printer from the list of printer models, and then click [Add].
If [Installable Options] dialog box appears, configure settings as needed, and then click
[Continue].
8. Quit System Preferences.

Setting Up Options for Mac OS X

This section explains how to configure the printer driver.
1. Start System Preferences.
2. Click [Print & Fax].
3. Click [Set Up Printers].
Depending on your computer's operating system, [Set Up Printers] may not appear. If [Set Up
Printers] does not appear, proceed to the following step.
4. Select the machine you are using, and then click [Show Info].
Mac OS X 10.5 or higher
Select the machine you are using, and then click [Options & Supplies...].
Mac OS X 10.4
Select the machine you are using, and then click [Printer Setup].
166