Ricoh SP 5200S Operating Instructions Manual page 145

4. If necessary, select the removable memory device that contains the file you want to print.
Only one removable memory device can be selected at a time.
5. Select the file you want to print.
You can select multiple JPEG files in the current folder at once.
To print a password-protected PDF file, press [Enter Passwrd], and then enter the password.
6. If necessary, press [Detailed Settings] to configure detailed print settings.
Note that certain settings cannot be selected simultaneously (for example, duplex printing cannot
be specified depending on the selected paper size).
• [Quantity]: Use the number keys to specify the number of copies (1 to 999) that you want to
print.
• Paper Size/Input Tray: Specify the paper size/input tray to use for printing. You can also
select to fit the image to the selected paper size by pressing [Fit to Paper Size] (this will be the
default selection for JPEG files).
• [Resolution] (for TIFF files): Select the resolution from [200 dpi], [300 dpi], [400 dpi], and
[600 dpi].
• [Resolution] (for PDF files): Select the resolution from [300 dpi (Fast)], [600 dpi (Fast)], and
[600 dpi (Standard)].
• [2 Sided]: When printing on both sides, specify a binding method.
• [Combine]/[Comb. Order]/[Seprtn Line in Comb.] (for PDF files): When combining multiple
pages, specify the number of pages to combine, the page order (orders that start from top-left
are available), and whether to print a separation line.
• [Sort]/[Stack] (for TIFF/PDF files): When printing multiple sets, specify whether to print in
batches or ordered sets.
• [Staple] (for TIFF/PDF files): If you are using type 3, you can specify the staple settings.
7. Press [Start Printing] or the [Start] key to begin printing.
Printing may take some time depending on the size or number of the files selected.
To print another file continuously, wait until the machine finishes printing. If you attempt to print a
file before the current job is finished, an error message will appear.
8. When printing is finished, press [Remove Mem. Device].
Direct Printing from a Removable Memory Device
143