Ricoh SP 5200S Operating Instructions Manual page 29

• To print via IPP-SSL, use the SmartDeviceMonitor for Client port.
• To print via IPP-SSL under Windows Vista/7 or Windows Server 2008/2008 R2, you must install
the device certificate on your computer before you install the printer driver using the IPP port. For
details, consult your administrator.
1. Quit all applications currently running.
2. On the [Start] menu, click [Printers and Faxes].
3. Click [Add a printer].
The [Add Printer Wizard] dialog box appears.
4. Click [Next >].
5. Click [A network printer, or a printer attached to another computer].
6. Click [Next >].
7. Click [Connect to a printer on the Internet or on a home or official network:].
8. In the [URL:] box, enter "http:// machine's IP address/ printer (or ipp)" as the machine's
address, and then click [Next >].
9. Click [Have Disk...].
10. Insert the provided CD-ROM into the computer's CD-ROM drive.
If Auto Run starts, click [Cancel] and then [Exit].
11. Click [Browse...], and then specify a location for the INF file.
If the CD-ROM drive is D, the source files of the printer driver are stored in the following locations:
• PCL 5e
D:\x86 or X64\DRIVERS\PCL5e\XP_VISTA or X64\(Language)\DISK1
• PCL 6
D:\x86 or X64\DRIVERS\PCL6\XP_VISTA or X64\MUI\DISK1
• PostScript 3
D:\x86 or X64\DRIVERS\PS\XP_VISTA or X64\MUI\DISK1
The PCL 6 printer driver is installed in the language specified by your operating system.
12. Click [Open].
13. Click [OK] to close the Install From Disk window.
14. Select the machine you want to use, and then click [OK].
If the [Hardware Installation] message appears, click [Continue Anyway].
15. Configure the default printer as necessary, and then click [Next >].
16. Click [Finish].
If installation is successful, the icon of the printer connected to the IPP port is added to the [Printers
and Faxes] window.
Installing the Printer Driver for the Selected Port
27