Resist Amount Adjustment - Sharp AR-M207 Service Manual

Main Sub
code code
51 02

Resist amount adjustment

Used to adjust the contact pressure (warp amount) of paper against the resist roller of the main unit resist
roller and the SPF/RSPF.
When this simulation is executed, the selection window of the adjustment items and the current set value
are displayed.
(Adjustment item selection window)
Sim51-2 RESIST ADJ.
1:TRAY1
2:TRAY2
3:TRAY3
1/3 [
Sim51-2 RESIST ADJ.
10:PRE FEED
4/4 [
Display text
1:TRAY1
2:TRAY2
3:TRAY3
4:TRAY4
5:BYPASS
6:RSPF(SIDE1)
7:RSPF(SIDE2)
8:RSPF A5
9:DUPLEX
10: PRE FEED
(*1) Valid only when an option is installed. (If an option is not installed, it is not displayed on the adjustment
window.)
(*2) When heavy paper slips in manual feed copy, or when a paper jam occurs in thin paper copy, adjust this
set value to remove the problem.
• Heavy paper slips.
• Thin paper jams.
The adjustment range is 1 - 99. The default of pre-feed time for manual paper feed tray paper feed is 32. The
default for the others 50.
Select an adjustment item (mode) with the cross key, and enter the set value with 10-key.
When [OK] key is pressed, the entered value is saved to the EEPROM and the machine shifts to the copy
execution window.
After completion of copying, the machine returns to the adjustment value input window.
When [START] key is pressed instead of [OK] key, the machine shifts to the copy execution window and
performs copying.
(Copy start window)
Ready to copy.
S
100%
8 1/2 11
(Copy execution window)
Copies in progress.
S
100%
8 1/2 11
Sim51-2 RESIST ADJ.
4:TRAY4
50
5:BYPASS
50
6:RSPF(SIDE1)
50
1- 99] 50 2/3
50
1- 99] 50
:Adjustment mode
:Resist amount in paper feed from TRAY1
:Resist amount in paper feed from TRAY2 (*1)
:Resist amount in paper feed from TRAY3 (*1)
:Resist amount in paper feed from TRAY4 (*1)
:Resist amount in paper feed from manual tray
:Resist amount on SPF/RSPF document surface (*1)
:resist amount on RSPF document back (*1)
:Document resist amount in A5 document back transport (*1)
:Resist amount in DUPLEX print (Second print surface) (*1)
:Pre-feed time of the manual feed tray paper feed. (*2)
Increase the set value.
Decrease the set value.
AR-M207 M165 M162 SIMULATIONS 7-46
Contents
50
50
50
[ 1- 99]
50
2
BACK
Adjustment
Copy start
OK
item selection
window
window
START
Copy execution
START
window
End of copy execution
Sim51-2 RESIST ADJ.
7:RSPF(SIDE2) 50
8:RSPF A5 50
9:DUPLEX 50
3/3 [ 1- 99] 50
Remark