Main
Sub
code
code
22
15
Trouble memory display
The latest 20 troubles are displayed. (The oldest one is overwritten sequentially.)
[CA] key: Exits the simulation mode.
[Interruption] key: Shifts to the sub code input window.
,
keys: Switches to another page.
Sim22-15 TROUBLE 1/2
XX-XX XX-XX XX-XX
XX-XX XX-XX XX-XX
XX-XX XX-XX XX-XX
XX-XX XX-XX XX-XX
The display sequence is as shown below.
Sim22-15 TROUBLE 1/2
1
5
2
6
3
7
4
8
In this case, (1) is the latest one and (12) is the oldest.
22
SPF jam counter display
Used to display the SPF JAM counter.
When [Interruption] key is pressed, the machine goes to the sub code input window. When [CA] key is
pressed, the machine exits the simulation mode.
Sim22-22 JAM CNT
SPF
: nnnnnnn
24
01
Jam total counter clear
When this simulation is executed, the clear confirmation window is displayed as shown below.
When [OK] key or [START] key is pressed, the jam total count and the jam memory are cleared and the
machine shifts to the sub code input window.
Sim24-1 COUNTER CLR
JAM COUNTER CLEAR
AER YOU SURE? EXEC
02
Trouble memory clear
Used to clear the trouble memory and the trouble history data in the EEPROM.
When [Interruption] key is pressed, the machine shifts to the sub code input window. When [CA] key is
pressed, the machine exits the simulation mode.
Sim24-2 COUNTER CLR
TROUBLE COUNTER
CLEAR
AER YOU SURE? EXEC
04
SPF counter clear
Used to clear the SPF paper feed counter.
Sim24-4 COUNTER CLR
SPF COUNTER
CLEAR
AER YOU SURE? EXEC
[CA] key: Exits the simulation mode.
[Interruption] key: Shifts to the sub code input window.
Contents
Sim22-15 TROUBLE 2/2
Key
XX-XX XX-XX XX-XX
XX-XX XX-XX XX-XX
XX-XX XX-XX
Key
9
10
11
12
AR-M207 M165 M162 SIMULATIONS 7-16
Remark