Internal - Sharp AR-M207 Service Manual

2. Internal

21
22
21 Toner cartridge lock release lever
22 Toner cartridge
23 Document feeder tray (when the SPF is installed)
24 Original guides (when the SPF is installed)
25 Feeding roller cover (when the SPF is installed)
26 Right side cover (when the SPF is installed)
27 Fusing unit release levers
28 Roller rotating knob
29 Exit area (when the SPF is installed)
30 Reversing tray (when the RSPF is installed)
31 Photoconductive drum
32 Fusing unit paper guide
Warning: The fusing unit is hot. Do not touch the fusing unit when removing misfed paper. Doing so may cause a burn or injury.
Caution: Do not touch the photoconductive drum (green portion) when removing the misfed paper. Doing so may damage the drum and cause
smudges on copies.
Note: The model name is on the front cover of the machine.
23 24
28
To replace the toner cartridge, pull out the toner cartridge while pushing on this lever.
Contains toner.
Place the original(s) that you wish to scan face up here. Up to 40 sheets can be
placed.
Adjust to the size of the originals.
Open to remove misfed originals.
Open to remove misfed originals.
To remove the paper misfed in the fusing unit, push down on these levers and
remove the paper.
Rotate to remove misfed paper.
Originals exit the machine here after copying/scanning when the SPF is used.
Pull out to remove misfed originals.
Images are formed on the photoconductive drum.
Open to remove misfed paper.
AR-M207 M165 M162 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-2
25
26
27
29 30
31 32