Flash Rom Program Writing Mode - Sharp AR-M207 Service Manual

Main Sub
code code
49 01

Flash Rom program writing mode

Used to download the programs and data sections of the main unit MCU/IMC board, the FAX board, and the
operation panel.
When this simulation is executed, the machine immediately shifts to the download mode and the following
display is shown.
O When entering the download mode
Download Mode.
Connect the main unit and the download PC with a USB cable, and start downloading with the maintenance
tool.
When downloading is started, the display is changed as follows:
O Receiving download data
Download Data
Receiving.
O Processing download data
Do not turn the
power off.
O When downloading is completed
Processing finished.
Turn off the power.
O When an error occurs
Error.
MCU : --
IMC : --
FAX : --
PNL : --
Used to display an error code at the error position in downloading of MCU/IMC/FAX/PANEL.
The error codes to be displayed are shown below.
Contents
AR-M207 M165 M162 SIMULATIONS 7-38
Remark