Image Contrast Adjustment (300Dpi); Exposure Mode Setting - Sharp AR-M207 Service Manual

Main Sub
code code
46 18

Image contrast adjustment (300dpi)

Used to set the contrast for each mode.
When this simulation is executed, the list of the setting items and the current set value are displayed.
Select an item to be changed with [ ] and [ ] keys, and enter an adjustment value with 10-key.
The setting range is 1 - 99. When [
When the set value is increased, the contrast becomes higher. When the set value is decreased, the
contrast becomes lower. Though copying is made only at density 3, the contrast levels at density 1 from
density 5 are also changed accordingly.
Window display
1:AE
2:TEXT
3:PHOTO 1
4:PHOTO 2
5:TEXT (TS)
6:AE (TS)
Sim46-18 GAMMA SET.
1:AE
2:TEXT
3:PHOTO 1
1/2 [ 1- 99]
Enter an adjustment value and press [OK] key. The entered value is saved to the EEPROM and the machine
shifts to the copy window.
Sample copying can be performed during this simulation.
19

Exposure mode setting (

Used to set the following three items. Select an item with the UP/DOWN key of the cross key and enter a set
value with 10-key.
(1) : table setting
(2) : AE operation mode
(3) : PHOTO image process setting
When this simulation is executed, the current set code number of the above three modes are displayed.
Sim46-19 AE MODE
1:AE MODE
2:AE STOP
3:PHOTO
[ 1-
(1) AE MODE(
Used to set the priority operation mode of the AE mode. When the image takes priority regardless of the
toner consumption, set to 1. When the toner consumption must be suppressed regardless of image quality,
set to 2.
Code number
1
2
* If this setting is changed, SIM 46-30 returns to the default.
(2) AE STOP (AE operation mode)
Used to set the area for automatic exposure correction in image process.
Code number
0
1
(3) PHOTO (PHOTO image process setting)
Used to set the image process when the PHOTO mode is selected. Selection is available in the following two
modes:
Code number
1
2
] or [ ] key is pressed, the page can be changed.
: Adjustment mode
: AE MODE (300dpi)
: TEXT MODE (300dpi)
: PHOTO MODE (Error diffusion)
: PHOTO MODE (Dither)
: TS MODE (TEXT) (300dpi)
: TS MODE (AE) (300dpi)
Sim46-18 GAMMA SET.
4:PHOTO 2
50
5:TEXT(TS)
50
50 6:AE(TS)
50 2/2
table setting/AE operation mode setting/Photo image process setting)
1
0
1
2] 1
table setting)
Priority on image quality (Default for Japan)
Priority on toner consumption (Default for EX Japan)
AE operation mode
Lead edge stop (Default)
Real time process (All areas)
Image process mode
Error diffusion process (Default)
Dither process
AR-M207 M165 M162 SIMULATIONS 7-33
Contents
50
50
50
[ 1- 99] 50
table setting
Remark
Default:
2
Default:
0
Default:
1