Document Off-Center Adjustment - Sharp AR-M207 Service Manual

Main Sub
code code
50 12

Document off-center adjustment

Used to adjust the scanning start position in the main scanning direction of the document.
When this simulation is executed, the selection window of the adjustment items and the current set value
are displayed.
(Adjustment item selection window)
Sim50-12 ORG. CENTER
1:OC
2:SPF(SIDE1)
3:SPF(SIDE2)
[
(Note) 2:SPF(SIDE1) is available only for the model with the SPF/RSPF.
(Note) 3:SPF(SIDE2) is available only for the model with RSPF.
The adjustment value is in the range of 1 - 99. (Default: 50)
When the adjustment value is increased, the document scanning position is shifted to the right and the
image is shifted to the left as a result.
When the adjustment value is increased by 1, the scanning area is shifted by 0.1mm.
Select an adjustment item (mode) with the cross key, and enter the set value with 10-key.
When [OK] key is pressed, the entered value is saved to the EEPROM and the machine shifts to the copy
execution window.
After completion of copying, the machine returns to the adjustment value input window.
When [START] key is pressed instead of [OK] key, the machine shifts to the copy execution window and
performs copying.
(Copy start window)
Ready to copy.
S
100%
8 1/2 11
(Copy execution window)
Copies in progress.
S
100%
8 1/2 11
Display text array : Adjustment mode
1: OC
50
2: SPF (SIDE1) : SPF document (front) off-center adjustment
50
3: SPF (SIDE2) : SPF document (back) off-center adjustment
50
1- 99] 50
AR-M207 M165 M162 SIMULATIONS 7-43
Contents
: OC document off-center adjustment
BACK
Adjustment
Copy start
OK
item selection
window
window
START
Copy execution
START
window
End of copy execution
Remark