Machine Condition Check; Toner Save Mode Setting; Job Separator Paper Exit Mode Setting; Language Setting Clear - Sharp AR-M207 Service Manual

Main Sub
code code
26 07

Machine condition check

When this simulation is executed, the copy speed of the machine is displayed.
Sim26-7 CPM CHECK
16CPM
[CA] key: Exits the simulation mode.
[Interruption] key: Shifts to the sub code input window.
18

Toner save mode setting

Used to switch ON/OFF of the toner save mode.
When this simulation is executed, the current set value is displayed. Enter a set value with 10-key and press
[OK] key or [START] key. The set value is saved in the EEPROM.
* When this setting is changed, the toner save setting of the key operator program is also changed
accordingly.
Sim26-18 TONER SAVE
1:TONER SV MODE
0=OFF 1=ON
[ 0-1]
[CA] key: Exits the simulation mode.
[Interruption] key: Shifts to the sub code input window.
20

Job separator paper exit mode setting

Used to set the paper exit mode of the job separator.
* The purpose is to allow the simplified check when the job separator option is installed. It is valid only
during the adjustment simulation. Without installing a printer or a FAX machine, paper is discharged to the
upper stage to check if there is no problem or not.
If SIM26-01 is set to "Job separator not installed," paper is discharged to the lower stage regardless of
this setting.
Sim26-20 JOBSEP OUT
1:JOBSEP OUT
0=OFF 1=ON
[ 0-1]
[CA] key: Exits the simulation mode.
[Interruption] key: Shifts to the sub code input window.
22

Language setting clear

Used to clear the language setting. The scanner head is shifted to the fixing lock position.
(1) Initial display
Sim26-22 LANGUAGE
LANGUAGE SETTING
CLEAR
AER YOU SURE? EXEC
(2) Press [OK]or [START] key.(Execution is starred.)
Sim26-22 LANGUAGE
LANGUAGE SETTING
CLEAR
(3) After completion of counter clear and shifting to the lock position
Sim26-22 LANGUAGE
PLEASE SHUT OFF
THE POWER.
Contents
Displayed CPM list
14CPM
16CPM
20CPM
Code: Setting
0: Toner save OFF
0
1: Toner save ON
0
Code: Setting
0: Lower tray
0
1: Upper tray
0
EXEC
AR-M207 M165 M162 SIMULATIONS 7-21
Remark
Default:
0 (Toner save OFF)
Default:
0 (OFF)