Adjusting The Exhaust Gas Volume - Yamaha 2009 Diversion XJ6S Service Manual

EAS4S81002

ADJUSTING THE EXHAUST GAS VOLUME

TIP
Be sure to set the CO density level to standard,
and then adjust the exhaust gas volume.
1. Turn the main switch to "OFF" and set the en-
gine stop switch to "ON".
2. Simultaneously press and hold the "SE-
LECT" and "RESET" buttons, turn the main
switch to "ON", and continue to press the but-
tons for 8 seconds or more.
TIP
"dI" appears on the clock LCD.
3. Press the "SELECT" button to select the CO
adjustment mode "Co" "1" or the diagnostic
mode "dI".
4. After selecting "Co", simultaneously press
the "SELECT" and "RESET" buttons for 2
seconds or more to execute the selection.
TIP
The selected cylinder number appears on the
clock LCD.
To decrease the selected cylinder number,
G
press the "RESET" button.
To increase the selected cylinder number,
G
press the "SELECT" button.
The cylinder number "01" indicate cylinder #1,
G
#4 and the cylinder number cylinder number
"02" indicate cylinder #2, #3.
1
FUEL INJECTION SYSTEM
5. After selecting the cylinder, simultaneously
press the "SELECT" and "RESET" buttons
for 2 seconds or more to execute the selec-
tion.
6. Change the CO adjustment volume by press-
ing the "SELECT" and "RESET" buttons.
TIP
The CO adjustment volume appears on the
tripmeter LCD.
To decrease the CO adjustment volume, press
G
the "RESET" button.
To increase the CO adjustment volume, press
G
the "SELECT" button.
7. Release the switch to execute the selection.
8. Simultaneously press the "SELECT" and
"RESET" buttons to return to the cylinder se-
lection (step 5).
9. Turn the main switch to "OFF" to cancel the
mode.
8-80