Exhaust pipe assembly nut
20 Nm (2.0 m·kg, 14 ft·lb)
Exhaust pipe assembly bolt
17 Nm (1.7 m·kg, 12 ft·lb)
Exhaust pipe assembly and muf-
fler bolt
20 Nm (2.0 m·kg, 14 ft·lb)
Muffler bolt
25 Nm (2.5 m·kg, 18 ft·lb)
8
6
2
7
4
New
4. Install:
• Side cowlings
Refer to "GENERAL CHASSIS" on page 4-1.
EAS20600
ADJUSTING THE EXHAUST GAS VOLUME
TIP
Be sure to set the CO density level to standard,
and then adjust the exhaust gas volume.
2
New
8
6
7
3
New
(8)
1
5
PERIODIC MAINTENANCE
1. Turn the main switch to "OFF".
2. Simultaneously press and hold the "TCS"
button "1" and "RESET" button "2", turn the
main switch to "ON", and continue to press
the buttons for 8 seconds or more.
3. Press the "TCS" button "1" to select ECU in
the multi-function meter right display, and
then simultaneously press the "TCS" button
and "RESET" button "2" for 2 seconds or
more.
TIP
All displays on the multi-function meter right dis-
4
play disappear and "DIAG" appears.
1
2
4. Press the "TCS" button "1" to select the CO
adjustment mode "CO" "2" or the diagnostic
mode "DIAG".
1
5. After selecting "CO", simultaneously press
the "TCS" button "1" and "RESET" button "2"
for 2 seconds or more to execute the selec-
tion.
6. Press the "TCS" button or "RESET" button to
select a cylinder number "3".
1
2
3-10
SELECT
ECU
SCU
2
CO
3
CO
01