Event Log Search; Figure 65 - Event Log Search Screen - Eneo DLR-2016/500V Operating Instructions Manual

User's Manual
Export
Selecting (Export) in the Search menu displays the following Export menu. See the following Clip Copy section
for details.
A–B Clip-Copy: Selecting A–B Clip-Copy will set the starting point of the video to be clip copied,
and the
will set the ending point of the video to be clip copied and displays the Clip-Copy screen.
Clip-Copy: Select Clip-Copy, and the Clip-Copy screen appears to allow clip copy setup.
Camera Menu
Selecting (Camera Menu) in the Search menu displays the following Camera Menu.
Zoom: Selecting Zoom and choosing the camera number zooms the current playback image of
the selected camera on the screen. It is the same as pressing the
again exits the Zoom mode.
NOTE: The Camera Menu also can be displayed by clicking the right mouse button on the screen while in the
search mode.
Alarm
Selecting (Alarm) in the Search menu resets the DVR's outputs including the internal buzzer during an alarm. It
is the same as pressing any button on the front panel when the alarm is activated.
Panic
Selecting (Panic) in the Search menu starts panic recording of all cameras, and selecting
It is the same as pressing the
Data Source
Selecting (Data Source) in the Search menu allows you to select the data source to be searched. Selecting Record
searches recorded data on primary storage installed in the DVR, and selecting Other searches recorded data on storage
used for another DVR then installed in this DVR.
Exit
Selecting (Exit) in the Search menu exits the search mode and enters the live monitoring mode.

Event Log Search

Figure 65 — Event Log Search screen.
54
icon displays at the bottom-left corner of the screen. Selecting A–B Clip-Copy again
button.
PANIC
The DVR maintains a log of each time the Alarm Input port
is activated. The Event Log Search screen displays this list.
Use the arrow buttons to highlight the event for which you
would like to see video.
There is no determined user authority to display the Event Log
Search screen, however, the event video will not be played
unless a user with Search authority logs into the system .
Pressing the (Play/Pause) button will extract the event
video and display the first image of the event. Pressing the
button will start playing the "event" video segment.
Pressing returns to live monitoring.
SEARCH
button. Selecting Zoom
ZOOM
again stops panic recording.