Event Log Search; Figure 45: Event Log Search Screen - Eneo DLR-2104/1.0TBV Operating Instructions Manual

Status
Selecting (Status) in the Search menu allows you to check the status of the DVR's system, inputs and storage. Refer
to the previous Live Monitoring – Status Monitoring section for details.
NOTE: Selecting Status will only be enabled for a user who has System Check authority.
Data Source
(Data Source) in the Search menu allows you to select the data source to be searched. Selecting Record
Selecting
searches recorded data on primary storage installed in the DVR, and selecting Other searches recorded data on storage
used for another DVR then installed in this DVR.
Exit
Selecting (Exit) in the Search menu exits the search mode and enters the live monitoring mode.

Event Log Search

The DVR maintains a log of each time the Alarm Input port is activated. The Event Log Search screen displays this
list. Use the arrow buttons to highlight the event for which you would like to see video.
There is no determined user authority to display the Event Log Search screen, however, the event video will not be played
unless a user with Search authority logs into the system .
Pressing the (Play/Pause) button will extract the event video and display the first image of the event. Pressing
the button will start playing the "event" video segment. Pressing
NOTE: It is possible that no recorded image displays on the current screen. Change the screen mode to 3x3,
for the 8-channel DVR and 2x2 for the 4-channel DVR. You will be able to easily see the camera have
recorded video during target time.
You can also narrow your event search by selecting the Option... button and setting up the new search condition.

Figure 45: Event Log Search screen.

Digital Video Recorder
returns to live monitoring.
SEARCH
61