Auto Power Off; Speaker Mode; Output Level Attenuation; Other Functions - Roland FR-3x Owner's Manual

Auto Power Off
Th is parameter
allows v ou
to specify how
mm
long the FR-3 x should wait before
switching itself off while vo u are not
using it.
Value OFF, 1 ~3
Defaul t setting:
The available options are:
Setting
Meaning Setting Meaning
OFF Disabled 2
15111inutes
1 10 minutes 3
20 minutes
WARNING : Be aware that anv unsaved changes are
lost when the FR-3x is switcheel off bV th is function . Be
sure to save all important settings as soon as vo u can
(page 44).
Speaker Mode
When vo u use th e FR-3x for live perfor-
mances anel therefore connect it to an
external amplification system , it mav be
convenient to switch off the FR-3x's in ternal speake rs,
because eloing
50
preserves batterv power. See also
"Switching off th e internal speakers (Spea ke r Moele)" on
p.37.
Va lue OFF, On
Default setting: On
Th e "OFF' setting means that the internal speakers are
off. Th e "On " se tting means tha t the in ternal speakers
a re active.
Output Level Attenuation
The FR -3x has alevel atten uation func-
tion that allows VO U to aelapt its output
level to the aud io elevice VO U wish to
•
connec t it to. The attenuation val ue is expressed in elB.
Value - 12, - 6, OFF
Default setting: OFF
[NOTE]
Th is parameter has
110
effect on the FR-3x's in ternal speakers.
V-Acco rdi on Roland
Auto Power Off
Other functions
The following func ti ons are covered in the chapter
"Data manag ement via th e FR-3x's USB port" on p. 40.
• User Set lo ad
This function all ows vou to loael Sets •
from a USB memorv to one of the
four internal User memori es. See
"Loading User Set memori es from USB memorv
(optional)" on p. 41.
• User Program lo ad
This function allows vou loael
10
User •
Program settings fro m a USB memorv
(proviel ed vo u have alreaelv saved User
Programs to that USB memorv). See also "Loael ing
User Prog ram memori es from USB memorv
(optional)" on p. 40.
• Sound Set loael
This function allows v
ou
to adel new
III
sounds to the FR -3x original sounds.
See "Loading new sounds from a USB
memorv (op tion al )" on p. 41 for deta ils.
• FR-3 cOlllpatibilitv
This function allows vo u to import the .
se ttings of a legacv FR -3 V-Accorelion .
See "Importing th e settings of a
previo us FR-3 mod el " on p. 42 for eIetaiis.
• User Program save
Th is functi on allows v
ou
to save th e
III
con tents of the User Program memo-
ries to a USB memorv (optional) con-
nected to the USB port. See "Saving User Program
memories to USB memorv (optional)" on p. 40.
5 5