Midi List Parameters; Seleeting The Desired Midi Li St Parameter - Roland FR-3x Owner's Manual

FR -3x V-Acco rdi on
(onnecting to MIDI devices
Seleeting the desired
MIDI LIST
parameter
1.
Press and hold the [SET] register to ente r
MIDI LIST mode.
The display shows the name of the last parameter
YO Li seleeted.
2.
Use trebl e register [5] or [6] (MIDI LIST) to
select the desired parameter.
(Here. we seleeted the "Chord TX/RX Channel" param-
eter.)
(NOTE]
Pressing registers [5) and [6) (MIDI LIST) simultaneousl y will
select the first parameter. "Mld".
3.
Use register [1] (
......
VALUE) or [2]
(VALUE
~ )
to set the desired MIDI channel.
To return to the last setting yo u saved for this
parameter. press registers [1] and [2] silllultaneously.
5 8
4.
If you need to change another MIDI LIST
parameter, repeat steps 2 and 3.
5.
If you want to use this change on ly tempo-
rarily, press the [SET] register to leave this
mode.
Otherwise, proeeed to save your ehanges:
Saving your changes
1.
Press and hold the [SET] register until the
display looks as follows:
2.
Press register [2] (VALUE
~ )
to save your
settings.
The display now looks as follows:
If you don't wan t to save yo ur ehanges, press [1]
(~
VALUE). The display brie fly shows the "no" Illes-
sage.
3.
Press register [7] (ENTER) to confirm your
intention.
The settings are stored internally and the display
briefly shows the "y.E.S." Illessage (the three dots
flash). then "don" when the set tings are stored. Next,
the display returns to the Illaster page.
MIDI LIST
parameters
MIDI Out/In
This parallleter allows YOLi to define the
fLInetion of the FR -3x's MIDI OUT/IN
soeket.
Value Out, In
Default setting: Out
• Out
lill
Select this setting if you want to play on th e FR-3x's
keyboards and transmit the MIDI data generated by
YOLir playing to an external deviee .
• In
Seleet this setting if yo u want to reeeive MID I data
generated by an external deviee.