Selecting Orchestral Sounds In Free Bass Mode - Roland FR-3x Owner's Manual

Seleeting orehestrai sounds in Free Bass mode
1.
To select Free Bass mode, simultaneously
press the three bass registers labeled "FREE
BASS".
2.
Simultaneously press the three registers
labeled "ORCH FREE BS".
The flashing digi t in t he l1liddle now shows the nUI1l -
ber of t he last orehestrai Free Bass so und you
selec ted , along wi th a do t.
The dot l1leans that you are in Orehestrai Free Bass
11l 0de. The nUl1lber itself flashes to signal that the
Free Bass sec tion is active.
3.
Press one of the seven bass registers to
select the desired sound.
In this 11l0de, the following so unds are available :
ORCH FREE BS
sOllIlds
1* Trol11bone 5* Perc Organ
2* Clarinet 6 Ac Guitar
3* Oboe 7 Ac Piano
4* Flute*
The chord rows of the bass & chord buttons now play
the selected orehestrai soulld. (The bass bUttOIlS,
however, still play the selected accordion SO U/lCI.)
[NOTE]
The dynal11ics of sounds l11arked with an asterisk [O) can
only be controlied by bellows 1110vel11ents. Those sounds are
not veloci ty sensitive. For the other sounds. see also
"Orchestra BassjChord Touch" on p. 48.
4.
To leave this mode, simultaneously press the
three "FREE BASS" registers.
[NOTE]
You can change the volul11e level of the orchestral Free
Bass sound if it is toa loud or too soft with respect to the
other ava ilable sections. See "Orchestra Bass Level. Orches-
tra Chord Level. Orchestra Free Bass Level" on p. 46.
V-Accordion Roland
Se/ec ting orchestra/ sounds in Free Bass made
3 3