Orchestra/Organ Octave Tx; Orchestra Bass Tx/Rx Channel; Orchestra Bass Octave Tv; Orchestra Chord Tx/Rx Channel - Roland FR-3x Owner's Manual

FR-3x V-Acco rdi o n
(onnecting to
MIDI
devkes
Orchestra/Organ Octave TX
This para meter allows vou to transpose •
th e Note-on messages transmitted bV
the Orchestra section .
Value
Defa ult setting: O
Orchestra Bass TX/RX Ch annel
This parameter allows vo u to define the
nn
MIDI channel for the ORCH BASS part.
KUl
Value 1
~
16, OFF
Defau lt se tting : 5
•
1 ~ 16
Specifies th e orchestral bass part's MIDI channe l.
• OFF
Select th is set ting if the orchestral bass part sho uld
nei ther receive nor transm it MIDI da ta.
Orchestra Bass Octave TX
This parame ter allows vo u to transpose
the Note-on messages transm itted bV
the orchestra l bass part.
Default se tting: O
Orchestra Chord TX/RX Channel
This parameter allows vou to define the
MIDI channel for the orches tral chord
part.
Value l
~
16, OFF
Defa ult setting: 6
•
1 ~ 16
III
•
Specifies the orchestral chord part's MIDI channel .
• OFF
Select this se tti ng if the orchestral chord part sho uld
neither receive nor transmit MIDI data.
Orchestra Chord Octave TX
This parameter allows VO ll to transpose
the Note-on messages transmitted bV
the orchestral chord part.
Value
Defa ult se tting: O
6 0
liD
Orchestra Free Bass TX/RX Channel
This parameter al lows vo u to define th e
III
MIDI channel for the orchestral Free
Bass part.
Value
1 ~ 1 6,
OFF
Defau lt setting: 7
•
1~16
Specifies th e orchestral Free Bass part's MIDI channe l.
• OFF
Select this setting if the orchestral Free Bass part
should neither rece ive nor transmit MIDI data.
Orchestra Free Bass Octave TX
This parameter allows vo u to transpose
III
the Note-on messages transmitted bV
the orchestral Free Bass part.
Value
Defaul t se tti ng: O
Basic Channel TX/RX
This parameter allows vou to set the •
basic MIDI channel.
The "Basic Channel" can be used for
selecting Sets from an external MIDI device (using pro-
gram chang e num bers). Please see "M I DI implementa-
tion" on p. 71 for th e program change numbers of the
Se ts.
Value
1 ~ 1 6,OFF
Default sett ing: 13
Th e assig nment set here applies both to the transmis-
sion ("TX") and recep tion ("RX") of MIDI data.
•
1 ~ 16
Specifies th e Basic Channel number.
• OFF
Select this setting if no MID I data sho uld be trans-
mitted/received on th e Basic Channel.
Contral Ch ann el TX
The "Contrai Channe!" is used for send-
ing program change messages (see
p. 62). This parame ter allows vo u to set
th e control MIDI channe l number.
Value
1 ~ 1 6,
OFF
Defau lt setting: 13
•
The assignment se t here applies both to the transm is-
sion ("TX") and recep tion ("RX") of MIDI data.
•
1 ~ 16
Specifies th e Con trol Channel number.
\