Adjusting The Volume And Balance; Adjusting The Chorus And Reverbeffects - Roland FR-3x Owner's Manual

FR- 3x V- Acco rdion
Before you start playing
• Your headphones may be damaged if the volume of a
device is already turned up when you plug them in.
Minilllize the vol ullle before you plug in the head-
phones.
• Excessive input willnot on ly dalllage your hearing,
but Illay also strain the headphones. Please enjoy
Illusic at an appropriate vol ullle.
Adjusting the volume and balanee
Here is how to ad just the volume on vour FR-3x.
[NOTE]
If headphones are connec ted, the [VO L] knob controls the lis-
ten ing leve!.
1.
Use the [VOL] knob to set the desired vol-
ume.
Adjust the volullle while you play the FR-3x and
Illove the bellows to prod uce sound.
Turning the
[VOL]
knob clockwise increases the vol-
LI III
e, turning it co unterclockwise decreases it.
2.
Use the [BAL] knob to adjust the volume
balanee between the bass/chord and treble
sections.
Turning it to wards "BASS" decreases the treble sec-
tion's vo lullle. Turning it to wards 'TREBLE" decreases
the bass/chord section's volume.
The selected balance setting
("t1"~"t63" ,
"O",
"b1" ~
"b63") is briefly shown in the display.
2 2
Adjusting the chorus and reverb
effects
The FR-3x eontains twa digital effeets: Chorus and
Reverb. The ehorus effeet gives the impression that sev-
eral instruments of the same type are plaving at the
same time (it is similar to detuning severai reeds of a
register). The reverb effeet gives the impression that
vou are plaving in a eoneert hall, a ehureh or a room. It
adds "depth" to the sound.
1.
Rotate the [CHORUS] knob to adjust the
level of the chorus effect.
Adjust this setting while playing the FR -3x an d IllOV-
ing the bellows to prod ll ce so und. The chor us level
you select
(O~
127) is briefly shown in the display.
2,
Rotate the [REVERB] knob to adjust the level
of the reverb effect.
Adjust this setting while playing the FR-3x and mov-
ing the bellows to produce sound. The reverb level
you select
(O~
127) is briefly shown in the display.
3.
Turn th e [CHORUS] or [REVERB] knob all the
way towards the small dot if
YOLI
don't need
th e effect in question .
[NOTE]
See p.
47
for how to select a different chorus or reverb
type.