Download Print this page
Hide thumbs Also See for V-Accordion FR-2:

Advertisement

Available languages

Available languages

Quick Links

Kindly take note of the following
The following functions have been added or changed as a result of a system software update for both FR-2 models (FR-2 and
FR-2b).
Bass-to-Treble mode
The FR-2 also provides a mode in which it can be used like a
bassoon accordion. In this mode, the bass part is played with
the right hand. The bass and chord buttons are inactive (a
real bassoon accordion doesn't have bass/chord buttons and
can only be played with one hand).
(1) Press [SET] E + register [5] to activate Bass-to-Treble
mode.
(2) Use the Treble registers F to select the desired bass-to-
treble sound.
These sounds are not the same as the ones you can usually
select with the bass registers. (The bass registers cannot be
used in this mode.)
There are five accordion sounds and six orchestral sounds.
The numbers in the table below refer to the Treble registers
you need to press.
Bass-to-Treble sounds
Accordion sounds
1
Classic
2
Jazz
3
I-Folk
4
D-Folk
5
Bandoneon
Each register [6]~[8] allows you to select two orchestral
sounds. Press it once to select the "a" sound, and again to
select the "b" sound. Pressing it a third time will select the
"a" sound again.
(3) Start playing the bass part with your right hand.
See also the notes below.
(4) Press [SET] + register [5] again to leave Bass-to-Treble
mode.
You can also leave this mode by pressing and holding the
[SONG÷DEMO] button J (to listen to the demo songs), by
pressing the [SONG÷DEMO] button (to select Song mode)
or by pressing [SET] + register [4] (to select Free Bass mode).
Notes regarding Bass-to-Treble mode
In Bass-to-Treble mode...
• The bass & chord part (left hand) is not available (the bass
& chord buttons do nothing).
602.000.0359
Orchestral sounds
6a
Acoustic
6b
Fretless
7a
Fingered
7b
Picked
8a
Tuba Mix
8b
Bowed
• The accordion volume (registers [1]~[5]) can be set with the
"Treble/Bass & Chord Balance" parameter; the orchestral
bass volume (registers [6]~[8]) is set with the "Orchestra
Bass Level" parameter.
• The FR-2 transmits and receives on MIDI channel "2" (Bass
& Free Bass channel).
• The following functions are not available:
Set selection
Playing drum sounds with the bass and chord buttons
Orchestral Bass part
Orchestral Chord part
Bass registers (the bass & chord parts are not available)
Octave UP & DOWN
Free Bass mode & sounds
The FR-2 also provides a Free Bass mode. A free-bass system
on an accordion allows performers to play melodies and their
own chords with their left hand. In this "free" mode, each
left-hand button therefore only triggers one note. The avail-
able range covers three octaves or even more.
Using the Free Bass section
(1) Press [SET] E + register [4] to activate Free Bass mode.
(2) Use the bass registers to select the desired Free Bass
sound.
Free Bass registers
1
Low
2
Low, Low + High
3
Low + High
4
Low, High
5
High
(3) Press [SET] + register [4] again to return to normal bass
and chord mode.
RES 703-09 FR-2 V2 Addendum E/D/F
r
V-Accordion
Addendum
Bass
Free Bass
8'
4'
L
H
16'
8'
1

Advertisement

loading

Summary of Contents for Roland V-Accordion FR-2

  • Page 1 V-Accordion r® Addendum Kindly take note of the following The following functions have been added or changed as a result of a system software update for both FR-2 models (FR-2 and FR-2b). • The accordion volume (registers [1]~[5]) can be set with the Bass-to-Treble mode “Treble/Bass &...
  • Page 2 FR-2/FR-2b V-Accordion Addendum Orchestral sounds for the Free Bass section New FUNCTION parameters Instead of accordion sounds, you can use orchestral sounds in Free Bass mode: As a result of the FR-2’s expanded functionality, two addi- (1) Press [SET] E + register [4] to activate Free Bass mode. tional buttons (28, 29, 30 32, 33, FR-2b) or keys (Bb1, C#3, Eb3, F#3, Eb4, FR-2) can now be used to select functions: (2) Press the [ORCH¥CHORD] button D (it lights).
  • Page 3 FR-2’s sections should use to transmit MIDI messages. By pulled influences the sound – which corresponds to an default, all Roland V-Accordion instruments use MIDI acoustic accordion’s response. This effect can be translated channel “1” for the Treble section, MIDI channel “2” for the into a MIDI message most external instruments under- bass buttons and MIDI channel “3”...
  • Page 4 FR-2/FR-2b V-Accordion Addendum (11) Wait until register [1] stops flashing and the [SET] regis- Archiving your settings via MIDI (Dump TX) ter’s flashing pattern returns to normal speed, then stop MIDI can also be used for transmitting parameter settings recording on your sequencer. from the FR-2/FR-2b to an external MIDI device and back.
  • Page 5 V-Accordion Addendum Free Bass Mode N. Europe Finnish (C3= note number 48) Note: The note names on the bass buttons correspond to the MIDI note numbers. The note range of the Bass part is 1 octave. Note: The actual sound range depends on the type of reed and footage.
  • Page 6 Button brightness Day, Night POWER Program Change TX Off, On MIDI TX channel Roland, Other Roland Arranger Control Off, On “POWER”: Reset when you switch off the FR-2. “OK”: Can be saved in the Global area (common to all Sets).
  • Page 7 V-Accordion r® Addendum Bitte beachten Sie folgende Dinge Die nachfolgenden Funktionen wurden im Rahmen einer Aktualisierung beider FR-2-Ausführungen (FR-2 und FR-2b) hinzugefügt oder geändert. • Wird die Akkordeonlautstärke (Register [1]~[5]) mit dem Rechtshändiger Bassmodus Parameter “Balance Diskant & Bass/Akkorde” eingestellt. Die Orchesterbasslautstärke (Register [6]~[8]) muss dage- Das FR-2 bietet auch einen Modus, in dem es wie ein Bassak- gen mit “Bass-Orchesterpegel”...
  • Page 8 FR-2/FR-2b V-Accordion Addendum Orchesterklänge der MIII-Sektion Neue ‘FUNCTION’-Parameter Statt Akkordeonklangfarben können Sie im MIII-Modus auch Orchesterklänge spielen. Auf Grund der Erweiterung des FR-2-Funktionsangebots ste- (1) Drücken Sie [SET] E + Register [4], um den MIII-Modus hen ab sofort weitere Knöpfe (28, 29, 30 32, 33, FR-2b) bzw. Tasten (Bb1, C#3, Eb3, F#3, Eb4, FR-2) für die Funktionsanwahl zu aktivieren.
  • Page 9 Einfluss auf den Klang hat. Das gilt auch für Laut Vorgabe verwenden alle V-Accordion-Instrumente dieses Instrument. Dieser Effekt wird in einen MIDI-Befehl von Roland MIDI-Kanal “1” für die Diskantsektion, MIDI- übersetzt, den die meisten MIDI-Instrumente “verstehen”. Kanal “2” für die Bassknöpfe und Kanal “3” für die Akkord- knöpfe.
  • Page 10 FR-2/FR-2b V-Accordion Addendum Archivieren Ihrer Einstellungen via MIDI (Dump TX) Anmerkung: Wenn Sie die Daten doch nicht übertragen möchten, müssen Sie Register [SET] betätigen. MIDI kann man auch zum Senden der Parametereinstellun- (11) Warten Sie, bis Register [1] aufhört zu blinken, während gen von und zum FR-2/FR-2b verwenden.
  • Page 11 V-Accordion Addendum MIII-Modus (Free Bass) N. Europe Finnish (C3= Notennummer 48) Anmerkung: Die Notennamen der Bassknöpfe entsprechen den MIDI-Notennummern. Der Bass-Part hat einen Tonumfang von 1 Oktave. Anmerkung: Die tatsächliche Lage richtet sich nach der gewählten Zunge und Fußlage.
  • Page 12 Out, In Helligkeit der Taster Day, Night Programmwechsel (Übertragung) Off, On MIDI-Übertragungskanal Roland, Andere Roland Arranger-Steuerung Off, On “AUS”: Wird beim Ausschalten des FR-2 zurückgestellt. “OK”: Kann im Global-Bereich gespeichert werden (gilt für alle Sets). Anmerkung: Die Vorgaben der folgenden Parameter wurden geändert: “Balg-Expression (Übertragung)” (Off), “Programmwechsel (Übertragung)” (Off),...
  • Page 13 V-Accordion r® Addenda Veuillez prendre note de ce qui suit Les informations suivantes ont été ajoutées ou modifiées suite à une mise à jour du système des deux modèles FR-2 (FR-2 et FR-2b). • Le volume de l’accordéon (registres [1]~[5]) peut être réglé Mode basses main droite avec le paramètre “Balance main droite/basses et accords”;...
  • Page 14 FR-2/FR-2b V-Accordion Addenda Sons orchestraux pour la section de basses libres Nouveaux paramètres ‘FUNCTION’ Vous pouvez utiliser des sons orchestraux au lieu de sons d’accordéon en mode basses libres: Suite aux modifications du FR-2, vous pouvez désormais uti- (1) Appuyez sur [SET] E + le registre [4] pour activer le liser deux boutons (28, 29, 30 32, 33, FR-2b) ou touches (Bb1, C#3, Eb3, F#3, Eb4, FR-2) supplémentaires pour sélectionner mode basses libres.
  • Page 15 MIDI. Par défaut, tous les instruments de la série V-Accor- Cet effet peut être traduit en messages MIDI compréhensi- dion Roland utilisent le canal MIDI “1” pour la section main bles pour la plupart des instruments externes. droite, le canal “2” pour les boutons d’accords et le canal Coupé...
  • Page 16 FR-2/FR-2b V-Accordion Addenda Le registre [1] clignote plus rapidement. Archivage de vos réglages via MIDI (Dump TX) Remarque: Appuyez sur le registre [SET] si vous ne souhaitez plus Le MIDI permet aussi de transmettre les réglages de paramè- tres du FR-2/FR-2b à un dispositif MIDI externe pour les archiver vos réglages.
  • Page 17 V-Accordion Addenda Mode basses libres N. Europe Finnish (C3= numéro de note 48) Remarque: Les noms des notes sur les boutons de basses correspondent aux numéros de note MIDI. La plage de notes de la partie de bas- ses s’étend sur 1 octave. Remarque: La tessiture réelle change en fonction du type de lame et du jeu choisis.
  • Page 18 Day, Night TENSION Transm. de changements de programme Off, On Canal de transmission MIDI Roland, Autres Roland Pilotage de l’arrangeur Off, On “TENSION”: Ce paramètre retrouve son réglage par défaut lors de la mise hors tension du FR-2. “OK”: Peut être sauvegardé dans la zone globale (commune à tous les sets).

This manual is also suitable for:

V-accordion fr-2b