Data Management Via The Fr-3X's Usb Port; Saving User Program Memories To Usb Memory; Loading User Program Memories From Usb Memory - Roland FR-3x Owner's Manual

FR- 3x V-A cco rd ion
Data management via the FR-3x's USB port
ID
Data management via the FR-3x's USB port
The FR-3x allows you to save and import User Program settings to/from an optional USB memory connected to its USB
port. You can
0150
import Sets and new sOLInds copied to YOLir USB memory lIsing your Pc. The Sets and sounds are
stored internally.
Saving User Program memories to
USB memory (optional)
Here is how to archive the contents of the FR -3x's 70
internal User Program memories (file extension ".uP3")
to an optional USB memory.
[NOTE]
Be sure to connect your USB ll1ell1ory before proceeding.
1.
Connect an optional USB memory to the
FR - 3x.
See page 34.
2.
Press and hold down the [SET] register.
The display shows the name of the last parameter
you se lected.
3.
Use treble register [3] or [4] (PARAM LIST)
to select "SAU" (Save).
4.
Use treble register [1] or [2] (VALUE) to see
the number of the file where the data will
be saved .
The display shows the name of the first empty file on
th e USB memory.
[NOTE]
The FR -3x uses nUll1bers as file nall1es to save your User
Progra ll1s to USB ll1emory. It cannot display the file num-
bers that already are in the USB memory.
5.
Press treble register [7] (ENTER).
Th e display shows "Urt" (Write). then "don" (Done).
after which the FR-3x returns to th e main page.
4-0
Loading User Program memories
from USB memory (optional)
The function diseussed
here
allows YOLi to load the set-
tings of
70
User Programs from a USB memory to the
FR -3x's internal memory.
[NOTE]
Be sure to conn ect your USB ll1emory before proceeding.
1.
Connect an optional USB memory to the
FR-3x.
See page 34.
2.
Press and hold down the [SET] register.
The display shows the name of the last parameter
yo u selected.
3.
Use treble register [3] or [4] (PARAM LIST)
to select "UPG" (User Program).
4.
Use treble registers [1] and [2] (VALUE) to
select the file number of th e User Programs
you want to load.
The display shows " ___ " instead of a number.
5.
Press treble register [7] (ENTER) to load the
selected User Programs.
The display shows "lad" (Load). th en "don" (Done).
after which the FR-3x re turn s to the main page.