Playing Back Audio Files; Selecting Audio Files - Roland FR-3x Owner's Manual

Playing back audio files
1.
Insert an optional USB l11el11ory into the
FR-3x's USB port (see left).
The FR- 3x automatically loads the first audio fil e in
alphabetical order that it detects ill th e USB mem-
ory's root folder.
2.
Hold down the [ORGANjORCHESTRA] regis -
ter and press register [O] to start playback.
Playback of the selected audio file starts and the dis-
play shows the first three charac ters of the audio
fil e's name as well as three dots that flash from left
to right:
The "serailing" dots (alternate flashing from lett to
right) mean that playback is running.
(In the example above, the display shows the first
three characters of a file called "Amazing
Grace.wav".)
The FR-3x oilly displays th e first three characters of
the audio file Ilames. See "Tip for namillg audio files"
011
p. 34 for how to ensure that you can tell the files
apar t.
See page 70 for how the FR-3x displays the charac-
ters of the selected file Ilame.
[NOTE]
If you hold down [ORGAN!O RCHESTRA) for more than 2
seconds without pressing ano th er register, the FR-3x
switches to demo sang made. In that case, press [ORGAN!
ORCHESTRA) again to leave demo sang made, then repeat
step 2.
3.
If you are using the audio file as your
accol11paniment. start playing on the FR-3x
as you norma"y would.
4.
To paus e playback of the audio file, hold
down the [ORGAN/ORCHESTRA] register and
press register [O].
V-Acco rd io n Roland
Playing back audio files
Playback of the selected audio file stops and the
three dots flash simultaneously:
CHORD/
BASS FREE
øs
lREBLE
[BIT[]
[ " W' i"·Wc-f"fEA4
If playback is stopped, the three dots fl ash
simultaneausly.
5.
To return to the beginning of the current
sang, hold down the [ORGANjORCHESTRA]
register and press register [9].
[NOTE]
Press registers [9) ([8) and [Q) (EZill) silllultaneously to
view the name of the currently selected audio file .
Selecting audio files
As stated above, the FR-3x automatically se/ects the
first audio file it detects on the USB memory you insert.
To se/ect a different file, proceed as follows:
1.
Press and hold the [SET] register to enter
PARAMETER made.
The display shows the name of the last parameter
yo u selected.
3 5