Making The Power Automatically Turn Off After A Time (Auto Off ); Turning Off The Auto-Off Function; Basic Operation - Roland FP-E50 Reference Manual

Basic Operations and the Screen
Making the Power Automatically Turn Off
After a Time
(Auto Off )
The power to this unit will be turned off automatically after a
predetermined amount of time has passed since it was last used
for playing music, or its buttons or controls were operated (Auto
Off function). If you do not want the power to be turned off
automatically, disengage the Auto Off function.
* Factory setting: 240 min.
¹ Any settings that you are in the process of editing will be lost when
the power is turned off. If you have any settings that you want to
keep, you should save them beforehand.
¹ To restore power, turn the power on again.

Turning off the Auto-Off Function

If you don't want the instrument to turn off automatically, change the
"Auto Off" setting to "Off".
1.
Press the [Menu] button .
The Menu screen appears.
Use the [ ä ä ] [ å å ] buttons to select "System", and then
2.
press the [Enter] button .
Use the [ ä ä ] [ å å ] buttons to select "General", and then
3.
press the [Enter] button .
Use the [ ä ä ] [ å å ] buttons to select "Auto Off" .
4.
5.
Use the [Dec] [Inc] buttons to change the value .
Parameter Value
Auto Off Off, 10, 30, 240 (minutes)
MEMO
The Auto Off setting is saved automatically .

Basic Operation

([ ä ] [ å ] [ ç ] [ æ ] Buttons)
Moving the Cursor
Use these buttons to move the cursor. Hold down the buttons to
move the cursor continuously.
Press another one of these buttons while moving the cursor
continuously to make the cursor move quickly.
Changing a Value
([Dec] [Inc] Buttons)
These buttons change the values. Hold down the buttons to make the
value change continuously.
Press the other button when changing the value continuously to
make the value change quickly.
Press the two buttons together to go back to the initial value.
Canceling an Operation
This button cancels the operation. This button is also used when
exiting a screen or closing a window.
Confirming an Operation
This button confirms the operation.
When the cursor is positioned at "Tone" or "Style" in the Tone screen,
press the [Enter] button to show the list screen.
12 12
([Exit] Button)
([Enter] Button)