Command
#set_usb_mouse
#set_video_allow
#set_web_port
#set_webui_ad_pass
#set_webui_user_pass
#use_telnet_login
#use_telnet_welcome
r
Important
Commands that are limited to a Sender or Receiver unit are marked as
"Tx only" and "Rx only", respectively. Unless otherwise noted, all commands
can be used when connected to either a Sender or Receiver unit.
Description
Sets the mouse operating mode
Enables or disables Video-over-IP
Sets the HTTP listening port
Sets the Administrator password for the Web UI
Sets the User password for the Web UI
Enable or disables Telnet login credentials
Enables or disables the Telnet welcome message
Routes an input to a Receiver unit (Rx only)
page | 65
Commands