Gefen EXT-HDKVM-LANTX User Manual page 32

While the current video channel is being displayed, press and release the Switch
3.
button on the Receiver unit. The Receiver unit will change to the next available video
channel that is being used by a Sender unit.
Let's look at an example: In the illustration below, we have one Receiver unit and
three Sender units. The numbers indicate the video channel for each Sender and
Receiver unit. Our Receiver unit is currently set to channel 2 and is receiving the
signal from the Sender unit on channel 2.
5
If we press and release the Switch button, the Receiver unit will automatically jump to
channel 5 because it is the next "larger" video channel number.
5
Receiver unit
HDMI Out
2
1
Sender unit
HDMI In
Receiver unit
HDMI Out
5
1
Sender unit
HDMI In
page | 20
Setting the Video Channel
LAN
Sender unit
2
Sender unit
HDMI In
LAN
Sender unit
2
Sender unit
HDMI In
HDMI In
HDMI In