Gefen EXT-HDKVM-LANTX User Manual page 122

#set_hdcp_allow
Enables or disables HDCP-encrypted sources. This command is only available when
connected to a Sender unit.
Syntax
#set_hdcp_allow param1
Parameters
param1
Example
#set_hdcp_allow 1
HDCP ENCRYPTED SOURCE SET TO ENABLED
PLEASE REBOOT THE UNIT TO APPLY CHANGES
Related Commands
#get_hdcp_allow
Integer
param1 Description
0
Disabled
1
Enabled
page | 110
Commands
[0 ... 1]