Table of Contents
Advertisement
Stop
Write down the current IP settings before making changes, since you will
need to restore the old settings later. If the Properties are set to "Obtain an IP
address automatically" and "Obtain DNS server address automatically",
you do not need the actual address settings.
10. Change the settings, as shown below.
11. Click the OK button, then close all Control Panel windows.
12. Open your Web browser and enter the IP address of the desired Sender or Receiver
unit. In our example, we would enter 169.254.7.231 in order to access the Web
interface of the Receiver unit.
Installation & Configuration
page | 9
Advertisement
Table of Contents
