Table of Contents
Advertisement
Commands
#set_udp_port
Sets the local UDP listening port.
Syntax
#set_udp_port param1
Parameters
param1
Integer
[0 ... 65535]
Example
#set_udp_port 50007
UDP COMMUNCATION IS SET TO PORT 50007
PLEASE REBOOT THE UNIT TO APPLY CHANGES.
Related Commands
#get_remote_udp_access
#get_remote_udp_ip
#get_remote_udp_port
#get_udp_access
#get_udp_port
#set_remote_udp_access
#set_remote_udp_ip
#set_remote_udp_port
#set_udp_access
page | 133
Advertisement
Table of Contents
