Table of Contents
Advertisement
Figure 2.3 - Unicast mode: Receiver unit R1 is now connected to Sender unit S1.
HDMI Out
HDMI Out
Receiver unit
5
5
Now, let's set both Sender S1 and S2 to channel 5 and observe what happens:
Figure 2.4 - Unicast mode violation: Two Sender units (S1 and S2) using the same
video channel.
HDMI Out
HDMI Out
Receiver unit
5
5
In this example, Receiver R1 will continue to receive audio/video data from Sender
S1, even though Sender S2 is set to the same channel. The reason for this is
because Receiver R1 and Sender S1 were already set to the same channel and
communicating (as depicted in Figure 2.3). However, this scenario violates the
unicast mode rule: A Sender unit can communicate with only one Receiver unit
at a time.
Receiver unit
2
Sender unit
1
Sender unit
HDMI In
Receiver unit
2
Sender unit
5
Sender unit
HDMI In
page | 26
Unicast & Multicast Modes
LAN
Sender unit
2
HDMI In
LAN
Sender unit
2
HDMI In
HDMI In
HDMI In
Advertisement
Table of Contents
