Table of Contents
Advertisement
Power
Link
1
EXT-HDKVM-LANS
Gefen
HDMI In
ID
Name
1
HDMI In
2
RS-232
3
Line In
4
Line Out
5
USB
6
Link
7
IR Out
8
5V DC
Mode
Reset
2
3
4
Line
Line
RS-232
In
Out
Description
Connect the included HDMI cable from this
connector to the Hi-Def source.
Connect the included RS-232 cable from this
port to an RS-232 device.
See
Using RS-232 (page 35)
information.
Connect a 3.5mm mini-stereo cable from the
Line Out jack on the multimedia PC to this
jack.
Connect a 3.5mm mini-stereo cable from this
jack to the Line In jack of a multimedia PC.
Connect the included USB cable from the
computer to this USB port.
Connects the Sender unit to the network (or
directly to the Receiver unit) using shielded
CAT-5e (or better) cable.
Connect an IR Emitter cable (Gefen part no.
EXT-IREMIT) from this jack to the Hi-Def
source to control the source from the viewing
location.
Connect the included 5V DC locking power
supply to this power receptacle.
page | 3
HD KVM over IP S
5
6
7
USB
Link
IR Out
Introduction
Page Title
8
5V DC
for more
Advertisement
Table of Contents
