Table of Contents
Advertisement
Commands
#set_netmask
Sets the network mask address. param1 must be specified using dot-decimal notation.
Syntax
#set_netmask param1
Parameters
param1
IP Address
Example
#set_netmask 255.255.255.0
NETMASK ADDRESS SET TO 255.255.255.0
PLEASE REBOOT THE UNIT TO APPLY CHANGES
Related Commands
#get_gateway
#get_ip_address
#get_ip_mode
#get_ipconfig
#get_netmask
#get_web_port
#set_ip_address
#set_ip_mode
#set_gateway
#set_web_port
page | 115
Advertisement
Table of Contents
