Gefen EXT-HDKVM-LANTX User Manual page 138

#set_showme
Enables or disables the "Show Me" feature. When the "Show Me" feature is enabled,
then both the Power and Link LED indicators, on the front panel, will flash. This quickly
identifies a unit and is useful when multiple units are being used. The default setting is
disabled.
Syntax
#set_showme param1
Parameters
param1
Example
#set_showme 1
SHOW ME ENABLED
Related Commands
#get_discovery
#set_discovery
Integer
param1 Description
0
Disabled
1
Enabled
page | 126
Commands
[0 ... 1]