Routing - D-Link DSL-2750E User Manual

Section 3 – Web Configuration

Routing

Static Routing
Choose ADVANCED > Routing > Static Routing. The page shown in the right
figure appears. This page is used to configure the routing information. In this
page, you can add or delete IP routes.
Click Add to add a static route.
The following table describes the parameters of this page.
Field
Destination Network
Address
Subnet Mask
Use Interface
Click Apply to save the settings.
IPv6 Static Routing
Choose ADVANCED > Routing > IPv6 Static Route. The page shown in the
right figure appears. This page is used to configure the routing information. In
this page, you can add or delete IP routes.
Click Add to add a static route.
The following table describes the parameters of this page.
Field
Destination Network
Address
Use Interface
Click Apply to save the settings.
D-Link DSL-2750E User Manual
Description
The destination IP address of the router.
The subnet mask of the destination IP
address.
The interface name of the router output
port.
Description
The destination IP address of the static
route.
The interface name of the static route.
54