D-Link DSL-2750E User Manual page 27

Section 3 – Web Configuration
Adding a WAN access in PPPoE mode:
Step 1 In Protocol drop-down list, select PPP over Ethernet (PPPoE).
Step 2 Enter the PPP Username and PPP password of PPPoE account
provided by your ISP.
Step 3 Re-enter the password for confirmation.
Step 4 Choose a connection type from the Type drop-down list. There are 3
connection types available: Always On, On Demand, Manual.
Always On: The system automatically keeps dialing for WAN
connection once the connection is off-line.
On Demand: The system automatically dials for WAN connection
once network access request is detected. If no request is sent from the
LAN within the IdleTime, the system automatically disconnect from the
internet. You can set the Idle Time as you need.
Manual: Manually dial to connect the WAN once powering on the
Router.
Step 5 For the entries that are not mentioned above, keep them as defaults.
After setting, click Add to add the new channel.
D-Link DSL-2750E User Manual 25