D-Link DSL-2750E User Manual page 32

Hide thumbs Also See for DSL-2750E:

Table of Contents

Section 3 – Web Configuration

DHCP IP Address Range: It specifies the first IP address in the IP

address pool. The router assigns IP address that base on the IP pool

range to the host.

DHCP Lease Time: The lease time determines the period that the

host retains the assigned IP addresses before the IP addresses

change.

Step 7

Select the LAN or WAN ports which are going to adopt the setting.

Step 8

Click Apply to make the settings take effect.

The DHCP RESERVATIONS LIST shown in the right figure appears. It used to

reserve a fixed IP address within IP address range for a specified PC. So the

DHCP Server will assign that fixed IP address to the specified PC all the time.

Step 1

Click Add, the right figure appears.

Step 2

Select Enable to enable this DHCP IP address reservation.

Step 3

In the computer name textbox, input the specified computer name.

Step 4

In the IP Address textbox, input an IP address to be assigned to this

specified PC. Note: the IP Address must be within the DHCP IP

address range.

Step 5

In the MAC address textbox, input the MAC address of the specified

PC.

Step 6

After setting, click Apply to add a DHCP server.

D-Link DSL-2750E User Manual

Table of Contents

Show Quick Links

Table of Contents