Global Ipv6; System Management - D-Link DSL-2750E User Manual

Section 3 – Web Configuration

Global IPv6

Choose MANAGEMENT > Global IPv6. The page shown in the right figure
appears. In this page you can enable or disable IPv6 function.

System Management

Choose MANAGEMENT > System Management. The page shown in the right
figure appears.
In this page, you can reboot device, back up the current settings to a file, update
settings from the file saved previously and restore the factory defaults.
The buttons in this page are described as follows:
Field
Reboot
Backup Setting
Update setting
Restore Default
Setting
Note:
Do not turn off your device or press the Reset button while an operation in
this page is in progress.
D-Link DSL-2750E User Manual
Description
Click this button to reboot the device.
Click this button to save the settings to the local
hard drive. Select a location on your computer to
back up the file. You can name the configuration
file.
Click Browse to select the configuration file of
device and then click Update Settings to begin
updating the device configuration.
Click this button to reset the device to default
settings.
61