D-Link DSL-2750E User Manual page 19

Section 3 – Web Configuration
Step 2 Set the time and date, and then click Next.
Step 3 Configure the Internet connection.
There are 5 types of connection mode: PPPoE, PPPoA, Dynamic IP, Static IP, and
Bridge.
- PPPoE/PPPoA
If the protocol is set to PPPoE or PPPoA, the page shown as the right figure
appears.
1) Choose country and ISP from drop-down list respectively.
2) Select PPPoE in Protocol.
3) Enter the VPI and VCI provided by your ISP.
4) Enter the Username and Password provided by your ISP.
5) Re-enter the password for confirmation.
Click Next to go to the next page.
D-Link DSL-2750E User Manual 17