Firmware Update; Access Controls - D-Link DSL-2750E User Manual

Section 3 – Web Configuration

Firmware Update

Choose MANAGEMENT > Firmware Update. The page shown in the right
figure appears. In this page, you can upgrade the firmware of the device.
To update the firmware, take the following steps.
Step 1 Click Browse...to find the file.
Step 2 Select Clear Config.
Step 3 Click Update Firmware to copy the file.
The device loads the file and reboots automatically.
Note:
Do not turn off your device or press the Reset button while an operation in
this page is in progress.

Access Controls

User Management
Choose MANAGEMENT > Access Controls > User Management. The page
shown in the right figure appears. In this page, you can change the password of
the user and set time for automatic logout.
You should change the default password to secure your network. Ensure that
you remember the new password or write it down and keep it in a safe and
separate location for future reference. If you forget the password, you need to
reset the device to the factory default settings and all configuration settings of the
device are lost.
Enter the current and new passwords and confirm the new password to change
the password. Click Apply to apply the settings.
D-Link DSL-2750E User Manual 62