D-Link DSL-2750E User Manual page 38

Section 3 – Web Configuration
Security Settings
Choose ADVANCED > Advanced Wireless > Security Settings. In this page,
you can set the security for the wireless network.
Step 1 In the Select SSID drop-down list, select a SSID to be configured. For
example: D-Link.
Step 2 In the Security Mode drop-down list, select a security encryption
mode for the wireless network. It is recommended to select Auto
(WPA or WPA2).
Step 3 In the WPA Encryption drop-down list, select TKIP+AES.
Step 4 Configure the WPA Mode.
- Auto (WPA or WPA2)-PSK: set the pre-shared key (password of
your wireless network) in the Pre-Shared Key field.
- Auto (WPA or WPA2)-Enterprise: enter the port, IP address, and
password of the Radius server. The wireless clients are required to
enter the username and password provided by the Radius server.
Step 5 Set the Group Key Update Interval. For higher security, WPA
password is updated periodically. This value is the update interval of
the WPA password. You can keep it as default.
Step 6 In Pre-Shared Key textbox, set the password for the wireless network.
WPS Settings
Choose ADVANCED > Advanced Wireless > WPS Settings. This page is used
to configure WPS settings.
There are 3 methods to realize wireless connection through WPS.
- PBC
Click the PBC button in this page. And then click WPS button on the client to be
connected within 2 minutes. The connection will be established.
- Based on the PIN of wireless client to be connected.
1) Select Enabled to enable WPS.
2) In select Mode drop-down list, select Enrollee.
3) In Configuration State drop-down list, select Unconfigured.
4) In Input Station PIN textbox, input the PIN code of the wireless client to
D-Link DSL-2750E User Manual 36