Table of Contents
Advertisement
Section 3 - Configuration
The Routing option is an advanced method of customizing specific routes of data through your network.
Destination IP:
Enter the IP address of packets that will take this route.
Netmask:
Enter the netmask of the route, please note that the octets
must match your destination IP address.
Gateway:
Enter your next hop gateway to be taken if this route is
used.
Metric:
The route metric is a value from 1 to 16 that indicates the
cost of using this route. A value 1 is the lowest cost and 15
is the highest cost.
Interface:
Select the interface that the IP packet must use to transit
out of the router when this route is used.
D-Link DIR-614 User Manual
Routing
38
Advertisement
Table of Contents
