Qos Configuration - D-Link DSL-2750E User Manual

Section 3 – Web Configuration

QoS Configuration

Choose ADVANCED > QoS Configuration. The page shown in the right figure
appears. The QoS Configuration contains 3 parts: Configure QoS Global
Options, Configure QoS Queue, Configure QoS Classification.
Configure QoS Global Options
Choose ADVANCED > QoS Configuration > Configure QoS Global Options.
The page shown in the right figure appears. You can tick in the checkbox and
then click Submit to enable queuing operation.
Configure QoS Queue
Choose ADVANCED > QoS Configuration > Configure QoS Queue. The page
shown in the right right appears. In this page, you can set QoS flow control.
The following table describes the parameters of this page.
Field
Enable
Upstream
Bandwidth
Scheduling Strategy
Enable DSCP/TC
Mark
Enable 802.1P Mark You may tick in the box to permit 802.1P Mark.
After modifying a queue, click Submit to enable the modification. Click Refresh
to refresh the queue.
D-Link DSL-2750E User Manual
Description
Tick in the box to enable queue.
Total bandwidth for upstream flow.
Scheduling algorithm of QoS queue.
You may tick in the box to permit DSCP/TC Mark.
47