Parental Control - D-Link DSL-2750E User Manual

Section 3 – Web Configuration
Note:
If you want to edit the 3G configuration, please ensure the 3G is in
disconnection status at first.
Click Edit, and the right page appears.
The following table describes the parameters of this page.
Field
Country
Profile Name
Dial_Number
Net Type
Backup Delay
Time
Recovery Delay
Time
Initialize Delay
Time
Mode Switch
Delay Time
After setting, click Apply to make the settings take effect. Click AutoSet to keep
the settings as default.

Parental Control

Choose ADVANCED > Parental Control. The Parent Control page shown in
the right figure appears.
This page provides two useful tools for restricting the Internet access. Block
Website allows you to quickly create a list of all websites that you wish to stop
users from accessing. MAC Filter allows you to control when clients or PCs
connected to the device are allowed to access the Internet.
Block Website
D-Link DSL-2750E User Manual
Description
Choose the country you located in the dropdown
list.
Choose the ISP you subscribed service from.
The number to be dialed to connect to 3G network.
It's recommended to keep it as default.
Choose the 3G network access type.
The response time for 3G connection dial-up after
DSL or Ethernet uplink is disconnected.
The time interval to re-dial.
The time for 3G card to initialize.
The time for mode switch.
42