Port Forwarding - D-Link DSL-2750E User Manual

Section 3 – Web Configuration

Port Forwarding

Choose ADVANCED > Port Forwarding. The page shown in the right figure
appears.
This function is used to open ports in your device and re-direct data through
those ports to a single PC on your network (WAN-to-LAN traffic). It allows remote
users to access services on your LAN, such as FTP for file transfers or SMTP
and POP3 for e-mail. The device accepts remote requests for these services at
your global IP address. It uses the specified TCP or UDP protocol and port
number, and redirects these requests to the server on your LAN with the LAN IP
address you specify. Note that the specified private IP address must be within
the available range of the subnet where the device is in.
Click Add to add a virtual server.
Enter an IP address in the Server IP Address field, to appoint the corresponding
PC to receive forwarded packets.
The Ports show the ports that you want to open on the device. The TCP/UDP
means the protocol type of the opened ports.
Click Apply to save the settings.
D-Link DSL-2750E User Manual 38