Information You Will Need About Your Dsl-2750E Router - D-Link DSL-2750E User Manual

Section 2 – Installation
Username
This is the Username needed to access the Router's management interface. When you attempt to connect to the device through a web browser you
will be prompted to enter this Username. The default Username for the Router is "admin."
Password
This is the Password you will be prompted to enter when you access the Router's management interface. The default Password is "admin." The
user may change this.
LAN IP addresses for the DSL-2750E
This is the IP address you will enter into the Address field of your web browser to access the Router's configuration graphical user interface (GUI)
using a web browser. The default IP address is 192.168.1.1. This may be changed to suit any IP address scheme the user desires. This address will
be the base IP address used for DHCP service on the LAN when DHCP is enabled.
LAN Subnet Mask for the DSL-2750E
This is the subnet mask used by the DSL-2750E and will be used throughout your LAN. The default subnet mask is 255.255.255.0.
D-Link DSL-2750E User Manual
Information you will need about your
DSL-2750E Router
7