D-Link DSL-2750E User Manual page 21

Section 3 – Web Configuration
Step 4 Configure the wireless network in this page.
1) Check Enable Your Wireless Network.
2) Set the SSID for your wireless network, you can also keep it as default.
3) Choose to display or hide your wireless network.
- Visible: Your wireless network can be detected.
- Invisible: You wireless network cannot be detected. Wireless clients
needs to enter the SSID and password manually to join this wireless
network.
4) Set the security level. The default security level of wireless network is None.
Choose an encryption mode for the wireless network. It is recommended to
choose WPA2-PSK.
5) Enter a new password in WPA2 Pre-Shared Key.
6) Click Next to go to the next page.
Step 5 Set a new login password. If you want to keep the previous password,
click Skip to go to next page directly. After setting a new password, click
Next.
Note:
The login password cannot contain a space.
D-Link DSL-2750E User Manual 19