Routing - D-Link DSL-2540U User Manual

Section 3 – Configuration

Routing

To access the Routing windows, click the Routing button in the Advanced Setup directory.
If the Enable Automatic Assigned Default Gateway checkbox is ticked, the
Router will accept the first default gateway assignment received from one
of the enabled PPPoA, PPPoE, or MER/DHCP enabled PVC(s).
If this checkbox is not ticked, enter the static default gateway and/or a
WAN interface. Click the Save/Apply button when you are finished.
Click the Add button on the Routing – Static Route window to access the
following window displayed on the next page.
Enter the static routing information for an entry to the routing table.
Click the Save/Apply button when you are finished.
D-Link DSL-2540U User Manual 47