Internet Setup-Dsl Wan - D-Link DSL-2750E User Manual

Section 3 – Web Configuration

Internet Setup-DSL WAN

Choose SETUP > Internet Setup. The page is shown as the figure appears on
the right. In this page, you can add or configure WAN interface of your router.
Step 1 Select DSL in WAN Access Type.
Step 2 Click Add to add a PVC.
Note:
To access the internet, at least one PVC is required to add.
Step 3 In the VPI and VCI textbox, enter the VPI and VCI value provided by
your ISP.
Step 4 In the protocol drop-down list, select the protocol according to the
internet service you subscribed from your ISP. There are 5 types of
protocols: PPP over ATM (PPPoA), PPP over Ethernet (PPPoE),
MAC Encapsulation Routing (MER), IP over ATM (IPoA), Bridging.
D-Link DSL-2750E User Manual 21