Nat - D-Link DSL-2750E User Manual

Section 3 – Web Configuration

NAT

Choose ADVANCED > NAT. The page shown in the right figure appears.
Traditional NAT would allow hosts within a private network to transparently
access hosts in the external network, in most cases. In a traditional NAT,
sessions are uni-directional, outbound from the private network. Sessions in the
opposite direction may be allowed on an exceptional basis using static address
maps for pre-selected hosts.
In this page, you are allowed to add, edit or remove a virtual server entry.
Click Add to add an NAT server.
After setting, click Apply to make the settings take effect.
D-Link DSL-2750E User Manual 57