Using The Built-In Stereo Microphones; Using External Inputs; Using An External Microphone; Adjusting The Audio Recording Levels - Sony PMW-EX1R Operating Instructions Manual

Using the Built-in Stereo
Microphones
Set the AUDIO IN switches, both CH-1 and
CH-2, to INT.

Using External Inputs

1
Set the AUDIO IN switches CH-1 and
CH-2 to EXT.
2
Connect external audio sources to the
AUDIO IN connectors CH-1 and CH-2.
3
Set the LINE/MIC/MIC+48V switches
CH-1 and CH-2 to LINE (line level:
+4 dBu).

Using an External Microphone

You can use an external microphone for
recording, such as the ECM-673 Electret
Condenser Microphone.
1
Loosen the screw of the microphone
holder and open the cover.
2
Attach a microphone, close the
microphone holder cover for the
original condition to secure, then
connect the microphone cable to either
of the AUDIO IN connectors (CH-1 or
CH-2).
64 Recording Audio Signals
1
4
to AUDIO IN
Cable clamp
3
Set the corresponding AUDIO IN
switch (CH-1 or CH-2) to EXT.
4
Set the corresponding LINE/MIC/+48V
switch (CH-1 or CH-2) according to the
connected microphone.
MIC: For a microphone that requires no
power supply
MIC +48V: For a microphone that requires
+48V power supply (such as the ECM-
673)
Note
Even when recording CH-1 for 2-channel
monaural by setting "EXT CH Select" of "Audio
Input" (page 127) of the AUDIO SET menu to
"CH-1," set the LINE/MIC/MIC+48V switch for
CH-2 to the same position as that for CH-1.
Adjusting the Audio Recording
Levels
You can select automatic or manual adjustment
mode independently for each channel.
To adjust the levels automatically (AGC)
When the AUDIO SELECT switches CH-1 and
CH-2 are set to AUTO, the audio recording levels
are automatically adjusted.
2
External
microphone
3